audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

With Generic Scan Tool|Page 2672 > < With Generic Scan Tool|Page 2670
Page 4
background image

-

Connect multimeter (voltage measurement range) as follows:

Connector

Measure against

Contact

2

Engine Ground

-

Operate the starter briefly. (The engine can be allowed to start.)
-

Specification: approx. battery voltage

If the specification is not attained:

-

Test for open circuit or short to Ground in wiring between fuel pump relay and contact 2 on connector via fuse.

-

Correct short circuit or open circuit if necessary.

-

Connect hand-held multimeter (voltage measurement range) between contacts 2 and 3 of connector.

-

Operate the starter briefly. (The engine can be allowed to start.)
-

Specification: approx. battery voltage

NOTE:  Contact 3 on the connector is for the Ground connection from the engine control module.

If the specification is not attained:

-

Test the wiring.

With Generic Scan Tool|Page 2672 > < With Generic Scan Tool|Page 2670