TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Clockspring Assembly / Spiral Cable: Service and Repair
Coil Connector With Slip Ring, Removing And Installing
Drivers airbag unit and steering wheel removed
-
Pull out steering column and tilt downward as far as it will go.
-
Remove screws - 1 - (2x), tightening torque 2.8 Nm.
-
Remove grip - 2 -.
-
Remove two Phillips-head screws - arrows -.
-
Tightening torque 0.6 Nm
-
Remove upper steering column switch trim - 1 -.
When installing, insert upper section into hooks on lower section, swivel downward and secure with screws.
-
Remove screws - 2 - (2x). Tightening torque 0.6 Nm
-
Remove hex socket head bolt - 1 -.
-
Tightening torque 0.6 Nm
-
Remove lower steering column switch trim - 3 -.