TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
-
Pull off output flange together with oil seal and bearing inner race. A- Three - arm puller, e.g. Kukko 45 2
-
Put thrust piece 30 555 on output flange.
-
Pull bearing inner race off output flange.
-
Pull off oil seal.
Installing
-
Insert bearing inner race in bevel box.
-
Drive new oil seal in flush.
-
Press in output flange.
-
Tighten hexagon nut to 350 Nm.