TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Wiper Arm: Adjustments
Wiper Arms, Adjusting
-
Move wiper arms to park position.
-
Remove wiper blade.
-
Insert wiper arm -2- in wiper arm adjusting tool 3358 B and secure with locking screw -3-.
-
Place open-end wrench -1- (24 mm A/F) over adjusting tool and adjust contact angle of wiper arm -2- (arrows) according to specifications
-
Loosen locking screw -3- and remove wiper arm -2- from adjusting tool.
-
Insert wiper arm -2- in wiper arm adjusting tool 3358 B again and secure with locking screw -3-.
-
Compare indicated angle with specification.
-
If necessary, repeat setting and checking procedure until angle is as specified.
-
Remove adjusting tool and install wiper blade.