TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
/Page-4067002.png)
-
Pull Bowden cable - 1 - out of guide - 2 - and detach.
NOTE: When installing, make sure hook - 3 - is facing upward.
Disconnecting electrical connectors
-
Disconnect harness connectors at item - 2 -.
Removing screw cap
-
Insert pin - 2 - (max. Dia. 2 mm) through hole on bottom part of switch trim.
-
Applying pin - 2 - press tab - 3 - slightly up and at the same time turn screw cap - 1 - in direction of - arrow -.
-
Remove screw cap - 1 -.
