TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
Trunk / Liftgate Switch: Service and Repair
CAUTION:
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according
to Owners's Manual
Rear Lid Contact Switch, Removing And Installing
Removing
-
Remove rear lid lock.
-
Disconnect electrical connection.
-
With rear lid lock -1- removed, use a flat-tipped screwdriver to release plastic tab -3- at the two rivets -4-.
-
Press lever -2- in direction indicated (arrow) and pull back plastic tab -3-.
-
Carefully remove contact switch -3- from rear lid lock -1-
Installing
-
Install in reverse order of removal.