TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
Clutch Switch: Testing and Inspection
Clutch Vacuum Vent Valve Switch - F36 -, Checking
NOTE: This signal is used to prevent engine speed swing oscillations and tip - in shock during clutch release and is required by the cruise control
system.
Test sequence
-
Connect VAS5051 tester or VAG 1551 scan tool and select control module for engine electronics using "address word" 01.
Ignition must remain switched on for this.
When indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- to select "Read Measuring Value Block" and press -Q- button to confirm input.
When indicated on display:
Read Measuring Value Block
Q
Input display group number XXX
-
Press buttons -0- , -6- and -6- to select "display group number 066" and press -Q- button to confirm input.