TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
/Page-1192003.png)
^
Recheck TDC position of camshafts.
^
The marks on the two camshafts must be in line with the arrows on the bearing caps.
^
Clean chain and camshaft sprockets opposite the two arrows on the bearing caps and mark installation position with colored marks.
-
The distance between the two arrows (and thus between the colored markings) is 16 rollers on the chain.
-
The notch on the exhaust camshaft is offset slightly toward the inside in relation to chain roller- 1 -.
Notes: Do not mark chain with a center punch or by making a notch or similar.
^
First remove bearing caps 3 and 5 on intake and exhaust camshafts.
^
Remove double bearing cap.
^
Remove both bearing caps next to intake and exhaust camshaft chain sprockets.
^
Unscrew securing bolts of hydraulic chain tensioner.
^
Loosen bearing caps 2 and 4 of intake and exhaust camshafts alternately and diagonally, and remove.
^
Remove intake and exhaust camshafts with hydraulic chain tensioner.
Installing
