TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
Evaporator Case: Service and Repair
Disassembly and Assembly
Heating And A/C Unit (With Heater Core And Evaporator), Disassembly And Assembly
1
-
Seal
-
Seals intake duct against air intake plenum.
-
Check and replace if damaged.
2
-
Air flap
-
Lightly lubricate hinge pivots with grease G 052 745 A3 or equivalent.
3
-
Grommet
4
-
Lever
5
-
Air distribution housing, upper part
-
Refer to Fig. 1 & 2
6
-
Fresh/recirculation flap
-
Lightly lubricate hinge pivots with grease G 052 745 A3 or equivalent.
7
-
Evaporator
-
Refer to Fig. 2 & 3
8
-
Pivot bushing
-
Lightly lubricate with grease G 052 745 A3 or equivalent.
9
-
Air distribution housing, lower part
-
Refer to Fig. 1 & 2
10
-
Screw
11
-
Pivot bushing
-
Lightly lubricate with grease G 052 745 A3 or equivalent.
12
-
Central flap lever
13
-
Screw
14
-
Temperature flap lever
15
-
Central flap
-
Note installation position (shorter section of flap faces up).
16
-
Footwell/defroster flap
-
Lightly lubricate hinge pivots with grease G 052 745 A3 or equivalent.
17
-
Temperature flap
18
-
Seal
-
Refer to Fig. 2 .
19
-
Threaded bracket
20
-
O-Ring
21
-
O-Ring
22
-
Expansion valve