TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
Evaporator Drain Tube: Service and Repair
Evaporator Housing Drain Valve, Removing And Installing
Removing and installing
-
Fold back pre-punched flap -D- in insulation mat and remove valve.
NOTE:
-
Remove valve -A- downwards from floor. When installing, make sure it is correctly positioned in bulkhead -B-.
-
When installed, the valve must not touch flap -D- in insulation mat.
-
The valve must not be sprayed with rustproofing wax or undercoating material.
-
If customer complaints mention dampness in the passenger compartment, ensure duct -C- is correctly positioned in valve -A-.