TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
Relay Box: Service and Repair
Central Electric Unit And Relay Carrier, Removing And Installing
CAUTION: Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according
to Owner's Manual.
Removing
-
Remove storage compartment on driver's side.
-
Loosen bolts -C- and threaded connections -D- and -E-.
-
Remove relays and control modules.
-
Remove central electric unit -B- and relay carrier -A- from below.
Installing
-
Install in reverse order of removal.
NOTE: Always refer to the applicable wiring diagram for identification of connections on central electric and relay carrier.