TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
Clutch Switch: Testing and Inspection
Clutch Vacuum Vent Valve Switch -F36-, Checking
Special tools and equipment
-
VAG1526A
-
VAG1527B
-
VAG1594A
-
VAG1598/31
-
VAS5051 with VAG5051/1
or
-
VAG1551 with VAG1551/3B
NOTE: This signal helps prevent excessive RPM oscillations and tip-in shocks when clutch is disengaged and is required for the cruise control system.
Test sequence
-
Connect VAS5051 tester or VAG1551 scan tool and select the control module for engine electronics using "address word" 01. See: Testing and
Inspection/Scan Tool Testing and Procedures/Scan Tool Testing/Scan Tool Connecting and Initial Checks/Connecting VAS 5051/VAG1551 Scan
Tool
Ignition must remain switched on for this.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- to select "Read Measuring Value Block" and press -Q- button to confirm input.