TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
Indicated on display :
Read Measuring Value Block
Q
Input display group number XXX
-
Press buttons -0-, -6- and -6- to select "display group number 066" and press -Q- button to confirm input.
Indicated on display
Read Measuring Value Block 66
->
1
2
3
4
-
Check Clutch Pedal Position (CPP) switch in display field 2.
Display Group 066
If indications do not resemble description:
Checking switch
-
Remove driver-side storage compartment.
-
Disconnect harness connector at Clutch Pedal Position (CPP) switch.
-
Connect multimeter between terminal 1 and 2 for resistance measurement.
-
Specification: approx. 0 ohm
-
Depress clutch pedal.
-
Specification: Infinity ohms (no continuity)