TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
/Page-2096003.png)
-
Fuel Pump (FP) relay (at position 4 of micro-central electrics in driver's footwell, left) must trigger.
If relay triggers now, but didn't during output DTM:
-
Replace Engine Control Module (ECM).
If relay does not trigger:
-
Switch ignition off.
-
Remove Fuel Pump (FP) relay.
-
Connect multimeter to terminal 19 of relay socket and Ground (GND) for voltage measurement.
-
Switch ignition on.
-
Specification: approx. battery voltage
If specified value is not obtained:
-
Check wire connections.
If specified value is obtained:
-
Switch ignition off.
-
Check the following wire connection for open circuit and short circuit to Ground (GND) and B+:
