TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
-
Install ball joint splitter as shown in illustration and press out ball joint.
-
Unscrew nut from tie rod end.
Notes: To protect ball joint threads, leave nut on a few turns.
-
Using puller Kukko V /176, press track rod off steering arm.
-
Unplug connector for ABS wheel speed sensor.
-
Press drive axle out.
Notes: When pressing drive axle out ensure sufficient clearance is available.
-
Remove drive axle from wheel bearing housing and tie up.
-
Housing to suspension strut.