TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
-
Replace each time after removing
19 - Hex bolt
-
Replace each time after removing
20 - Wheel bearing housing
-
Detaching suspension strut from wheel bearing housing go to Fig 1
-
Overview of wheel bearing assembly; Refer to Wheel Bearing
Fig. 1
Detaching suspension strut from wheel bearing housing
-
Apply special tool 3424 as shown and pry apart wheel bearing housing.
Suspension strut/coil spring, removing and installing
Special tools required
-
T 10001 shock absorber set
-
VAG 1 752/1 Suspension strut clamp
-
3186 Socket insert 21 mm AF
-
VAG1752/4 Spring retainer
-
3424 Spreader tool
-
V.A.G 1383 A Transmission jack
Removing and installing suspension strut
-
Remove wheels.