TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
-
Ensure coil spring is seated correctly in adapter VAG1752/7 (arrow).
Installing
-
Install coil spring with tensioning device VAG1752/1 onto lower spring support.
-
The end of the coil spring must lie against stop (arrow).
Tightening Torques:
Hex nut for upper shock absorber mounting Use new nut! 60 Nm (44 ft. lbs.)
Hex nut for upper spring plate 60 Nm (44 ft. lbs.)
Further installation of the suspension strut is performed in reverse sequence