TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
Fig. 2 Pressing constant velocity joint on
-
Press on carefully.
-
Tighten tensioner 40 04 securely, the driveshaft must not be pushed down within the tensioner, otherwise paint will be damaged.
-
Repair paint damage as follows if necessary: Remove grease with Nitro thinner L 001 600. Apply 2 component acrylic paint (ALN 769 041 with
hardener ALZ 009 001).
Fig. 3 Tensioning clamp on driveshaft
-
When performing repairs, select correct clamp from Parts Supplier.
Fig. 4 Pulling flange off
Fig. 5 Pulling flange on