TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
-
Remove upper nut on right suspension ball joint.
-
Apply ball joint splitter as shown in illustration and press out ball joint.
Notes: To protect the thread, leave the nut screwed a few turns on the ball joint thread.
-
Turn the steering wheel all the way to the left.
-
Remove heat shield for right drive shaft from bevel box.
-
Unbolt right drive shaft at transmission, move clear and tie up.
-
Place drip tray under the engine.
-
Unbolt the oil return pipe for the turbocharger from the sump and the cylinder block (arrows -2- and - 3 -).
-
Place container under the transmission.
-
Remove right hand drive flange bolt - arrow 1 -using V.A.G 1669.