TT Quattro Coupe V6-3.2L (BHE) (2005)
Garage Door Opener Control Head: Service and Repair
Garage Door Opener Control Module -J530-, Removing And Installing
Removing
CAUTION:
Before beginning repairs on the electrical system
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
Remove front bumper cover.
-
Remove screws -arrows-.
-
Remove retainer -1-.
-
Remove control module - 2-
-
Disconnect electrical connection.
Removing
Install in reverse order of removal, noting the following:
Tightening torque
Control module bracket to lock carrier
3 Nm