audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Doors, Hood and Trunk > < Rear Bumper Reinforcement|Service and Repair|Page 6775
Page 1
background image

Cabin Ventilation Duct: Testing and Inspection

Air Extraction Vents, Checking

Sealing lips -B- on vent frame -A- must be able to move freely and close by themselves.

NOTE:

-

Illustration shows location of extraction vents behind rear bumper. Remove rear bumper to access vents.

-

Vehicle is fitted with two air extraction vents (left and right) for forced air extraction.

To ensure proper air extraction from passenger compartment, check the following:

-

Ventilation slits -A- in luggage compartment trim must not be obstructed.

-

Air ducts in the luggage compartment trim must not be covered.

-

Air flow through vent frame -B- must not be obstructed by objects in the luggage compartment.

Doors, Hood and Trunk > < Rear Bumper Reinforcement|Service and Repair|Page 6775