TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Installation position of bushing halves
A - Upper half of bushing without collar, ribs faces body.
B - Lower half of bushing, collar faces bolt head
Note: Coat the rubber surfaces of the new bushings with assembly lubricant G 294 421 A1.
Note installation position of bushings.
-
Insert both bushing halves.
-
Press in new bushings using engine/transmission jack.
After installation, check position of steering wheel by test-driving vehicle.
Wheel alignment must be checked and adjusted if steering wheel is not in straight.