TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Unscrew bolts - 1 - (2x).
-
Tightening torque 23 Nm
Detaching central tube from bodywork (passenger-side)
-
Unscrew bolts - 1 - (2x).
-
Tightening torque 23 Nm
Lifting out central tube
-
Detach remainder of wiring harness from central tube.
-
Pull wiring harness - 3 - inwards and guide central tube - 1 - through loop of wiring harness - 3 -.
-
If loop in wiring harness is too tight, remove trim on upper A-pillar
-
Detach wiring from A-pillar.
-
Remove central tube from vehicle.
Installing:
-
Replace cable ties which have been cut open or damaged.
-
Bolt on central tube in line with old marks.