audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Mounting Block Central Tube (Coupe) Removing and Installing|Page 7025 > < Mounting Block Central Tube (Coupe) Removing and Installing|Page 7023
Page 7
background image

-

Position steering column switch with lower section of trim at a distance of 3 mm from steering wheel (distance - a -).

-

Tighten clamp - 1 -.

-

Tightening torque 2.8 Nm

-

Tighten hex socket-head bolt - 2 -.

-

Tightening torque 0.6 Nm

-

Perform remaining installation steps in reverse order of removal.

Mounting Block Central Tube (Coupe) Removing and Installing|Page 7025 > < Mounting Block Central Tube (Coupe) Removing and Installing|Page 7023