TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-1349002.png)
-
To install: insert sender for rotation rate -G202- into mounting bracket and align straight before tightening.
Note:
-
The sender for rotation rate is sensitive to shocks or impact.
-
Do not install a sender which has dropped to the ground otherwise proper operation is not ensured.
Removing and installing sensor for transverse acceleration -G200-
-
Use screwdriver to pry mount -1- off sensor for transverse acceleration -G200- -2- and remove sender.
-
To install: insert sensor for transverse acceleration -G200- -1- in holder.
-
Installation position: sloping side (arrow) of sensor for transverse acceleration -G200- must face mount -2-.
-
Slip mount over sensor for transverse acceleration -G200- until it engages with a click.
