TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-1362002.png)
-
Push on housing with coil connector, slip ring and steering angle sensor onto steering column switch until all retainer tabs engage with a click.
-
Break off transportation protection.
-
Adjust steering angle sensor to center position:
^
Yellow dot must be visible in hole - arrow 1 - and the two marks (arrows) must also be aligned.
-
Installing airbag unit and steering column.
-
Initiate basic settings for Steering angle sensor G85.
-
Perform ESP road test. See: Description and Operation/General Information
