TT Quattro Coupe V6-3.2L (BHE) (2005)
Wheel Speed Sensor: Procedures
Front
ABS wheel speed sensor, removing and installing
Removing
^
Release connector -1- on wheel speed sensor and disconnect wiring.
^
Unscrew bolt -2-.
^
Pull speed sensor out of wheel bearing housing.
Installing
Install in reverse sequence; note the following points:
^
Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with solid lubricant paste G 000 650.
^
Turn wheels fully onto left and right-hand lock and check clearance to speed sensor wiring.
Tightening torque