TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Take out protective seal using Removing wedge VAS 3409.
-
Use Removing wedge VAS 3409 to remove seal.
Note:
^
Make sure that the surface of the cylinder is not damaged, when removing.
Installing
-
The surface of the piston and seal must be cleaned with methylated spirits only, and then dried.
-
Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.
-
Insert seal in brake caliper housing.
-
Position outer sealing lip of protective seal on piston.