TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Remove seal using Removing wedge VAS 3409.
Installing
-
The surface of the piston and seal must be cleaned with methylated spirits and then dried.
-
Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.
-
Insert oil seal in brake caliper housing.
-
Place protective seal with the outer sealing lip on the piston.
-
Using Removing wedge VAS 3409, insert the inner sealing lip into the grove in the cylinder.
Note:
^
When doing this hold piston in front of caliper housing.