TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Apply special tool 3272 together with 3272/1 to piston on brake caliper housing.
-
Screw piston into housing by turning knurled wheel clockwise.
Note:
^
Adjusting piston with a normal resetting tool destroys automatic adjuster in brake caliper.
-
Install brake pads.
Brake Caliper, Pre-Bleeding
-
Open bleeder screw - arrow A - and use a standard bleeder bottle to fill with brake fluid until bubble-free brake fluid flows from the threaded hole
- arrow B - (brake hose connection). Close bleeder screw.
Note:
^
Position brake caliper as illustrated to pre-bleed.