TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-1556001.png)
Lateral Accelerometer: Procedures
ABS/ESP ITT Mark 20
Longitudinal acceleration sensor -G251-, removing and installing
Removing
-
Remove glove box:
-
Unplug electrical connector -2-
-
Use a screwdriver to pry mount off longitudinal acceleration sensor -arrows- and remove sensor -G251- -1-.
Note:
-
The longitudinal acceleration sensor is not resistant to shocks or impact.
-
Do not install a sensor which has dropped to the ground otherwise proper operation is not ensured.
Installing
Install in reverse sequence; note the following points:
-
Initiate basic setting for longitudinal acceleration sensor -G251-. See: Adjustments
