TT Quattro Coupe V6-3.2L (BHE) (2005)
Wheel Speed Sensor: Removal and Replacement
AWD Rear Axle Components
ABS Wheel Speed Sensor, Removing and Installing
Removing
-
Open cover -2- above connector for speed sensor.
-
Unplug electrical connector -1-.
-
Remove bolt -1-.
-
Pull speed sensor out of trailing arm.
Installing
Install in reverse sequence; note the following points:
-
Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with solid lubricant paste G 000 650.
Tightening Specification