TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Turn drain plug (arrow) on radiator counter-clockwise. If necessary install a drain hose to connection.
-
In addition, remove lower coolant hose at After-run coolant pump -V51- (arrow) and drain remaining coolant.
-
Disconnect electrical connector -1-.
-
Disconnect coolant hose -2-.
-
Pull After-run coolant pump -V51- downward out of rubber retainers. If necessary, spray with silicone-free lubricant.
Installing
Installation is performed in the reverse order. Note the following:
-
Fill cooling system.