TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Remove covers (right side) -1- and -2- at lock carrier and above coolant expansion tank (arrows).
-
Pull out oil dipstick.
Note:
Before removing, mark direction of rotation of poly V-belt with chalk or felt-tipped pen. If the belt runs in the opposite direction when it is
reinstalled, it can be damaged.
-
To release tension of poly V-belt, screw an M8 x 40 bolt (arrow) into bore on tensioning element.
-
Remove poly V-belt from Generator pulley.
-
Unscrew upper securing bolt -2- for Generator.
-
Remove upper securing bolts (upper arrows) for radiator cowl.