TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-637002.png)
-
Remove screw -1- and remove cover over coolant expansion tank (arrow).
Note:
Before removing the poly V-belt, mark the direction of rotation on the belt with chalk or a felt-tipped pen. A reversed rotation direction can cause
the belt to be damaged in operation. Ensure that the belt is properly seated in the pulleys when installing.
-
To release tension of poly V-belt, screw an M8 x 40 bolt (arrow) into bore on tensioning element.
-
Remove poly V-belt from Generator pulley.
-
Remove fasteners -1... 3- and center sound insulation.
