TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Install assembly device for valves 2036 with adapter plates 2036/1 and adjust to correct position.
-
Screw adapter T40012 with seal finger-tight into corresponding spark plug thread, connect to compressed air hose and apply a steady pressure.
^
Air pressure: at least 6 bar
-
Remove valve springs using valve lever VW541/1 A with press piece VW 541/6.
Note:
Tap assembly lever lightly with a hammer to loosen valve keepers that are stuck.
-
Remove valve stem oil seals using puller for valve stem oil seals 3364.
Installing
-
Insert plastic sleeve -A- onto valve stem to prevent damage to new valve stem oil seal -B-.
-
Lubricate sealing lip of valve stem oil seal.
-
Insert valve stem oil seal into press piece for valve stem oil seal 3365 and push carefully onto valve guide.
-
Install camshafts.