TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Mark and disconnect electrical connectors:
1 - Camshaft Position (CMP) sensor -G40-
2 - Camshaft Position (CMP) sensor 2 -G163-
3 - Valve -1- for camshaft adjustment -N205-
4 - Camshaft adjustment valve 1 (exhaust) -N318-
-
Disconnect electrical connector (left side) on cylinder head and move connector clear.
CAUTION
The fuel system is pressurized. Before opening the system place a clean cloth around the connection. Then dissipate the pressure by carefully
loosening the connection.
-
Disconnect fuel supply line -1- and fuel return line -2- by pressing release tabs.
-
Unscrew and move clear all electrical connectors on cylinder head and lay them back together with fuel rail.
-
Unscrew cylinder head cover bolts in sequence -11... 1-.