TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Lightly coat lower sealing surface of sealing flange with sealant (shaded area).
-
Apply a thin bead of sealant (arrow) to clean sealing surface of sealing flange, as shown in illustration.
^
Thickness of sealant bead (arrow): 2 to 3 mm
Note:
^
The sealant bead may not be thicker than 2 to 3 mm. If thicker, the excess sealant could enter the oil sump and clog the oil intake tube.
^
The sealing flange must be installed within 5 minutes of applying the sealant.
-
Carefully push sealing flange onto locating pins on cylinder block.
Note:
To install the sealing flange with an installed seal, use guide sleeve T1005311.
-
Fasten bolts in specified order:
-
Fasten bolts -1... 6-.
-
Fasten bolts -7... 16-.
-
Install crankshaft seal for vibration damper side.
-
Install vibration damper with new bolt.
-
Install poly V-belt.
Tightening torque