TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-2096001.png)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Fresh Air Intake Duct Temperature Sensor -G89-, Removing And Installing
-
Remove dust and pollen filter.
-
Remove glove box.
-
Reach into the intake housing and rotate temperature sensor -A- 90 degrees.
-
Reach between heating and A/C unit and A-pillar and remove temperature sensor from intake housing -arrow- with electrical connector -C- still
attached.
NOTE:
-
If the temperature sensor is difficult to rotate, carefully apply silicone spray to the contact surface of rubber grommet -B- on the intake
housing.
-
Checking -G89-.
