TT Quattro Coupe V6-3.2L (BHE) (2005)
Blower Motor: Service and Repair
Fresh Air Blower -V2-, Removing And Installing
-
Remove glove box.
-
Remove screw clip for foam covering.
-
Fold foam covering -A- away to one side.
-
Remove screws -B- and cover -C-.
-
Disconnect electrical connection -A- from fresh air blower.
-
Pull fresh air blower -B- downwards from housing.
Fresh air blower -V2-, separating from from base plate
NOTE: On vehicles from initial production, the fresh air blower is secured to the base plate by a screw. The base plate may also have a special
mat to provide noise insulation.
-
Remove screw -A-.
-
Remove fresh air blower from base plate -B-.
NOTE: As a running change in production, the original version will gradually be replaced by one in which the fresh air blower is clipped to the
base plate.