TT Quattro Coupe V6-3.2L (BHE) (2005)
Dashboard / Instrument Panel: Service and Repair
Switches In Instrument Panel
Switches In Instrument Panel, Removing And Installing
CAUTION:
Before beginning repairs on the electrical system:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Removing
-
Remove radio
-
Pull down cover plate -1- in top of radio slot opening -arrow- and remove from opening.
-
Reach upwards through radio slot and release switches by pulling retainer clip -1- downwards -arrow-.
-
Press switch to front out of instrument panel.
-
Take switch out of instrument panel through radio slot.
-
Disconnect electrical connection.
Installing
Install in reverse order of removal of removal, noting the following:
-
Press clip upwards until it engages.
-
Reconnect electrical connection.
-
Insert cover plate in top of radio slot.
NOTE: Cover plate can only be fitted in one position.