TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Disengage spring clip -2- and remove bulb holder -1- from housing.
-
Remove bulb -2- from holder.
NOTE: Do not disturb high beam bulb -1-.
Installing
Install in reverse order of removal, noting the following:
CAUTION: Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
-
Insert new bulb in holder.
-
Secure bulb holder with spring clip.
-
Close housing cover.