TT Quattro Coupe V6-3.2L (BHE) (2005)
Headlamp Alignment Sensor: Service and Repair
Left Front Level Control System Sensor -G78-, Removing and Installing
Left Front Level Control System Sensor -G78-, Removing And Installing
Removing (front-wheel drive and all-wheel drive)
CAUTION:
Before beginning repairs on the electrical system:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
The sensor is mounted above the front axle at the control arm.
-
Remove nut -4- and detach linkage.
-
Sensor -1- is mounted to the securing bracket -3- at vehicle.
-
Remove sensor and securing bracket by removing both nuts -2-.
-
Disconnect harness connector.
-
By removing both socket head bolts (3mm) at level control system sensor, it can be removed from the securing bracket -3-.
Installing
Install in reverse order of removal.