TT Quattro Coupe V6-3.2L (BHE) (2005)
Drive Belt: Service and Repair
Poly V-Belt, Removing and Installing
Poly V-belt, removing and installing
Removing
-
Remove screw -1- and remove cover over coolant expansion tank (arrow).
Note:
Before removing, mark the direction of rotation of the poly V-belt with chalk or a felt-tipped pen. If the belt runs in the opposite direction when it
is reinstalled, this can cause breakage. Ensure that the belt is properly seated in the pulleys when installing.
-
To release tension of poly V-belt, screw an M8 x 40 bolt (arrow) into bore on tensioning element.
-
Remove poly V-belt from Generator pulley.
-
Remove fasteners -1... 3- and center sound insulation.