TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-483003.png)
-
Remove the old air filter.
-
Thoroughly wipe oil filter housing with a shop cloth.
-
Remove old O-ring.
-
Take new O-ring and coat with engine oil.
-
Install new filter element and O-ring.
-
Tighten the filter housing lower section -3- at the hex bolt -2- to 30 Nm.
-
Install the oil drain plug -1- with a new seal and tighten to 10 Nm.
-
Fill with engine oil.
Tightening Specifications
Oil drain plug .......................................................................................................................................................................................................... 30 Nm
