TT Quattro Coupe V6-3.2L (BHE) (2005)
-
ATF present in overflow pipe runs out first (arrow -2-).
If ATF emerges via overflow pipe from ATF inspection aperture before ATF has reached 40°C, ATF level is OK.
-
Tighten ATF inspection plug (arrow -1-) with new seal to 27 Nm. ATF check is now complete.
Note:
-
The ATF inspection plug must be screwed in again before the ATF reaches a temperature of 45°C (50°C for tropical countries)
If no ATF emerges from ATF inspection aperture by the time ATF has reached 45°C, top off
-
Exit function "08 - Read measured value block" by pressing ? key.
-
Press "06 - End output".
-
Switch off ignition and disconnect Data Link Connector (DLC).
Filling ATF