TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-993003.png)
NOTE:
-
If "Kick-down ERROR" is displayed, check DTC memory
-
"ERROR" may be displayed, if accelerator pedal is not pressed immediately when instructed by tester, or if accelerator pedal was released while
adaptation was already running but process was not yet complete. In both cases exit "04 - basic setting" mode by clicking the <- button and
performing adaptation again.
-
End "04 - Basic Setting" by clicking <- button.
-
Select diagnostic function "06 - End Sequence".
-
Switch ignition off and disconnect diagnostic connection.
