TT Quattro Coupe V6-3.2L (BHE) (2005)
Air Bag: Service and Repair
Passenger Side Airbag, Removing and Installing
Passenger Side Airbag, Removing And Installing
CAUTION: Always read updated safety regulations for performing repair work on airbag.
1
-
Passenger side airbag unit
-
Removing
-
Disconnect battery Ground (GND) strap.
-
Remove glove box
-
Disconnect connector - 5 -
CAUTION: Never unplug red two-pin connector at passenger side airbag unit.
-
Remove screws - 3 - (4x).
-
Remove airbag unit.
-
Remove screws - 2 - (4x).
-
Set down airbag unit with impact cushion facing upward.
-
Installing
-
Install airbag unit.
-
Make sure connector - 5 - engages properly (audible click).
-
Switch ignition on.
CAUTION: Make sure no one is in vehicle when connecting battery.
-
Connect battery Ground (GND) strap.
2
-
Screws (4x)
-
Tightening torque 12 Nm
-
Must be replaced if airbag has been triggered