TT Quattro Coupe V6-3.2L (BHE) (2005)
Refrigerant Pressure Sensor / Switch: Service and Repair
High Pressure Sensor -G65-, Removing And Installing
-
Disconnect electrical connection.
-
Remove high pressure sensor -B-.
Tightening torque: 5 Nm (44 in. lb)
-
Replace O-ring seal -A- (10.8 mm x 1.8 mm).
NOTE:
-
A/C cooling efficiency cannot be checked with with -G65- removed or disconnected. Coolant Fan Control (FC) Module -J293- will not
energize A/C clutch -N25-.
-
Refrigerant system remains closed due to Schrader valve under sensor in line connection.
-
Checking signal.
-
Checking refrigerant system pressures