TT Quattro Coupe V6-3.2L (BHE) (2005)
After installation of the steering column, the steering angle sensor G85 must be readjusted.
Note: Insert the bearing bushing in the new steering column and tighten the shear bolt until the head shears off.
1 -
Shear bolt
2 -
Bearing bushing
-
Insert steering column with bearing bushing into central tube - arrow A -.
-
Push through hex bolt for bearing bushing from right side.
-
Secure steering column with new bolts - 2 -.
-
Tighten nut - 1 - to 9.5 Nm.
-
Pull out transport lock - arrow B -.
-
Push universal joint onto steering pinion and secure with new bolt - 1 -, to 30 Nm.
-
Install universal joint cover/footrest.
-
Connect connector for ignition/starter lock and immobilizer.
-
Illustration shows top view of steering column switch with steering wheel.
1 -
Steering wheel